ADN4663BRZ Datasheet PDF - ADI

●The ADN4663BRZ is a dual CMOS low voltage differential signalling (LVDS) Line Driver offering data rates of over 600Mbps (300MHz) and ultralow power consumption. It features a flow-through pin-out for easy PCB layout and separation of input and output signals. The device accepts low voltage TTL/CMOS logic signals and converts them to a differential current output of typically ±3.1mA for driving a transmission medium such as a twisted-pair cable. The transmitted signal develops a differential voltage of typically ±355mV across a termination resistor at the receiving end and this is converted back to a TTL/CMOS logic level by a line receiver. The ADN4663 and a companion receiver offer a new solution to high speed point-to-point data transmission and a low power alternative to emitter-coupled logic (ECL) or positive emitter-coupled logic (PECL).

● Flow-through pin-out simplifies PCB layout

● 300ps Typical differential skew

● 700ps Maximum differential skew

● 1.5ns Maximum propagation delay

● 23mW Typical low power dissipation

● Interoperable with existing 5V LVDS receivers