ADN4667ARUZ Datasheet PDF - ADI

●The ADN4667ARUZ is a quad CMOS low voltage differential signalling (LVDS) Line Driver offering data rates of over 400Mbps (200MHz) and ultralow power consumption. It features a flow-through pin-out for easy PCB layout and separation of input and output signals. The device accepts low voltage TTL/CMOS logic signals and converts it to a differential current output of typically ±3.1mA for driving a transmission medium such as a twisted pair cable. The transmitted signal develops a differential voltage of typically ±310mV across a termination resistor at the receiving end. This is converted back to a TTL/CMOS logic level by an LVDS receiver. The ADN4667 also offers active high and active low enable/disable inputs (EN and EN). These inputs control all four drivers and turn off the current outputs in the disabled state to reduce the quiescent power consumption to typically 10mW.

● Flow-through pin-out simplifies PCB layout

● 300ps Typical differential skew

● 400ps Maximum differential skew

● 1.7ns Maximum propagation delay

● Low power dissipation

● Interoperable with existing 5V LVDS receivers

● High impedance on LVDS outputs on power-down