AT89C5131A-RDTUM Datasheet PDF - Microchip

●The AT89C5131A-RDTUM is a 1-chip 8-bit high-performance flash version of the 80C51 Microcontroller with full-speed USB functions. This device retains the features of the Atmel 80C52 and adds 1024 bytes of on-chip expanded ERAM, dual data pointer, 16-bit up/down timer, programmable counter array, up to four programmable LED current sources, programmable hardware watchdog and power-on reset. Two software-selectable modes of reduced activity further reduce power consumption. In the idle mode the CPU is frozen while the timers, serial ports and interrupt system operate. In the power-down mode the RAM is saved and the peripheral clock is frozen, but the device has full wake-up capability through USB events or external interrupts.

● 80C52X2 Core (6 clocks per instruction)

● 16/32kB On-chip flash EEPROM in-system programming through USB

● 3kB Flash EEPROM for bootloader

● 1kB EEPROM data - Byte and page (128 bytes) erase and write

● 1024-byte On-chip expanded RAM (ERAM)

● Integrated power monitor (POR/PFD) to supervise internal power supply

● USB 1.1 and 2.0 Full speed compliant module with interrupt on transfer completion

● 100ms to 3s at 8MHz Programmable hardware watchdog timer (one-time enabled with reset-out)

● Keyboard interrupt interface on port P1 (8 bits)

● 400kBps TWI (Two Wire Interface)

● SPI interface (master/slave mode)

● 34 I/O pins

● 4 Direct-drive LED outputs with programmable current sources (2-6-10mA typical)

● 4-level Priority interrupt system (11 sources)

● Idle and power-down modes

● 0 to 24MHz On-chip oscillator with analogue PLL for 48MHz synthesis

● Industrial temperature range