●The CC2500RGP is a low-power 2.4GHz RF Transceiver designed for low-power wireless applications. The IC is intended for the 2400 to 2483.5MHz ISM (industrial, scientific and medical) and SRD (short range device) frequency band. The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500kBaud. CC2500 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of CC2500 can be controlled via an SPI interface. In a typical system, the CC2500 will be used together with a microcontroller and a few additional passive components.
● High sensitivity
● Low current consumption
● Programmable output power up to +1dBm
● Excellent receiver selectivity and blocking performance
● Programmable data rate from 1.2 to 500kBaud
● OOK, 2-FSK, GFSK and MSK supported
● Suitable for frequency hopping and multichannel systems due to a fast settling frequency synthesizer
● Integrated analogue temperature sensor
● All registers can be programmed with one burst transfer efficient SPI interface
● Digital RSSI output
● Programmable channel filter bandwidth
● Programmable carrier sense (CS) indicator
● Optional automatic whitening and de-whitening of data
● 400nA Sleep mode current consumption
● 240µs Fast start-up time from Sleep to RX or TX mode (measured on EM design)
● Wake-on-radio functionality for automatic low-power RX polling
● Separate 64bytes RX and TX data FIFOs (enables burst mode data transmission)
● Complete onchip frequency synthesizer, no external filters/RF switch needed few external components
● Support for asynchronous and synchronous serial receive/transmit mode for backwards compatibility
Part 3D Model
