●The CDCE913 and CDCEL913 devices are modular PLL-based, low-cost, high-performance, programmable clock synthesizers. They generate up to three output clocks from a single input frequency. Each output can be programmed in-system for any clock frequency up to 230 MHz, using the integrated configurable PLL.
●The CDCx913 has separate output supply pins, VDDOUT, which is 1.8 V for CDCEL913 and 2.5 V to 3.3 V for CDCE913.
●The input accepts an external crystal or LVCMOS clock signal. A selectable on-chip VCXO allows synchronization of the output frequency to an external control signal.
●The PLL supports SSC (spread-spectrum clocking) for better electromagnetic interference (EMI) performance.
●The device supports nonvolatile EEPROM programming for easy customization of the device to the application. All device settings are programmable through the SDA/SCL bus, a 2-wire serial interface.
●The CDCx913 operates in a 1.8-V environment. It operates in a temperature range of –40°C to 85°C.
● Member of Programmable Clock Generator Family
● CDCE913/CDCEL913: 1-PLL, 3 Outputs
● CDCE925/CDCEL925: 2-PLL, 5 Outputs
● CDCE937/CDCEL937: 3-PLL, 7 Outputs
● CDCE949/CDCEL949: 4-PLL, 9 Outputs
● In-System Programmability and EEPROM
● Serial Programmable Volatile Register
● Nonvolatile EEPROM to Store Customer Settings
● Flexible Input Clocking Concept
● External Crystal: 8 MHz to 32 MHz
● On-Chip VCXO: Pull Range ±150 ppm
● Single-Ended LVCMOS Up to 160 MHz
● Free Selectable Output Frequency Up to 230 MHz
● Low-Noise PLL Core
● PLL Loop Filter Components Integrated
● Low Period Jitter (Typical 50 ps)
● Separate Output Supply Pins
● CDCE913: 3.3 V and 2.5 V
● CDCEL913: 1.8 V
● Flexible Clock Driver
● Three User-Definable Control Inputs [S0/S1/S2], for Example, SSC Selection, Frequency Switching, Output Enable, or Power Down
● Generates Highly Accurate Clocks for Video, Audio, USB, IEEE1394, RFID, Bluetooth®, WLAN, Ethernet™, and GPS
● Generates Common Clock Frequencies Used With TI-DaVinci™, OMAP™, DSPs
● Programmable SSC Modulation
● Enables 0-PPM Clock Generation
● 1.8-V Device Power Supply
● Wide Temperature Range: –40°C to 85°C
● Packaged in TSSOP
● Development and Programming Kit for Easy PLL Design and Programming (TI Pro-Clock™)
● APPLICATIONS
● D-TVs, STBs, IP-STBs, DVD Players, DVD Recorders, and Printers
●All other trademarks are the property of their respective owners
