DS75176BM Datasheet PDF - TI

●DESCRIPTION

●The DS75176B is a high speed differential TRI-STATE® bus/line transceiver designed to meet the

●requirements of EIA standard RS485 with extended common mode range (+12V to −7V), for multipoint

●data transmission. In addition, it is compatible with RS-422.

●FEATURES

●• Meets EIA Standard RS485 for Multipoint Bus Transmission and is Compatible with RS-422.

●• Small Outline (SOIC) Package Option Available for Minimum Board Space.

●• 22 ns Driver Propagation Delays.

●• Single +5V Supply.

●• −7V to +12V Bus Common Mode Range Permits ±7V Ground Difference Between Devices on the Bus.

●• Thermal Shutdown Protection.

●• High Impedance to Bus with Driver in TRI-STATE or with Power Off, Over the Entire Common Mode Range Allows the Unused Devices on the Bus to be Powered Down.

●• Pin Out Compatible with DS3695/A and SN75176A/B.

●• Combined Impedance of a Driver Output and Receiver Input is Less Than One RS485 Unit Load, Allowing up to 32 Transceivers on the Bus.

●• 70 mV Typical Receiver Hysteresis.