FH34SRJ-6S-0.5SH(50) Datasheet PDF - Hirose Electric

● Low-profile

● With the 1.0 mm above the board and width of 3.8 mm the connectors are used in space saving applications

● Increased FPC/FFC retention

● As compared with existing similar construction connectors

● In horizontal direction

● Approximately 2.6 times

● In vertical direction

● Approximately 2 times

● Unique Back-Flip rotating actuator

● The rotating actuator opens from the back of the connector,assuring reliable electrical and mechanical connection

● Easy FPC/ FFC insertion

● Entry chamfers at all sides of the FPC/FFC insertion slot assure correct insertion and positioning of the FPC/FFC

● Delivered with the actuatoropen

● FPC/FPC can be immediately inserted without the need for the opening of the actuator

● Standard FPC/FFC thickness

● Reliable connection with the use of ready available 0.3 mm thick FFC/FPC

● Compatible with existing connectors.

● FPC/FFC and PCB mounting patterns are the same as for theFH19SC Series (bottom contact), allowing the use of both connectors for interconnections between two boards or replacement of the connectors

● Conductive traces on the PCB can run under the connector

● Noexposed contacts on the bottom of the connector

● Board placement with automatic equipment

● Flat top surface and packaging on the tape-and-reel allows use of vacuum nozzles. Standard reel contains 5,000 pieces

● Top and Bottom contact, halogen-free