HMC601LP4 Datasheet PDF - ADI

●Product Details

●The HMC601LP4(E) Logarithmic Detector/Controller converts RF signals at its input, to a proportional DC voltage at its output. The HMC601LP4(E) employ a successive compression topology which delivers extremely high dynamic range and conversion accuracy over a wide input frequency range. As the input power is increased, successive amplifiers move into saturation one by one creating an accurate approximation of the logarithm function.

●The output of a series of square law detectors is summed, converted into voltage domain and buffered to drive the LOGOUT output. For detection mode, the LOGOUT pin is shorted to the VSET input, and will provide a nominal logarithmic slope of 19mV/dB and an intercept of -100 dBm. The HMC601LP4(E) can also be used in the controller mode where an external voltage is applied to the VSET pin, to create an AGC or APC feedback loop. The HMC601LP4(E) provides a 15/34ns (rise/fall time) response time enabling RF burst detection to a pulse rate beyond 20 MHz.

●Applications

● Cellular/PCS/3G

● WiMAX, WiBro & Fixed Wireless

● Power Monitoring & Control Circuitry

● Receiver Signal Strength Indication (RSSI)

● Automatic Gain & Power Control Circuits

●### Features and Benefits

● Wide Dynamic Range: up to 75 dB

● Fast Pulse Response: 15/34ns (Rise/Fall Time)

● Flexible Supply Voltage:

●+2.7V to +5.5V

● Power-Down Mode

● Excellent Stability over Temperature

● 4x4mm Leadless SMT Package