ISO3086TDWR Datasheet PDF - TI

●Description

●The ISO3086T is an isolated differential line transceiver with integrated oscillator outputs that provide the primary voltage for an isolation transformer. The device is a full-duplex differential line transceiver for RS-485 and RS-422 applications that can easily be configured for half-duplex operation by connecting pin 11 to pin 14, and pin 12 to pin 13.

●Features

●1• Meets or Exceeds TIA/EIA-485-A

●• Signaling Rate up to 20 Mbps

●• 1/8 Unit Load – Up to 256 Nodes on a Bus

●• Thermal Shutdown Protection

●• Typical Efficiency > 60% (ILOAD = 100 mA) - see _SLUU469_

●• Low Bus Capacitance 7 pF (Typ)

●• 50-kV/µs Typical Transient Immunity

●• Fail-safe Receiver for Bus Open, Short, Idle

●• Logic Inputs are 5-V Tolerant

●• Bus-Pin ESD Protection

●– 11-kV HBM Between Bus-Pins and GND2

●– 6-kV HBM Between Bus-Pins and GND1

●• Safety and Regulatory Approvals

●– 4242 VPK Basic Insulation per DIN V VDE V 0884-10 and DIN EN 61010-1

●– 2500 VRMS Isolation for 1 minute per UL 1577

●– CSA Component Acceptance Notice 5A, IEC 60950-1 and IEC 61010-1 Standards

●Applications

●• Isolated RS-485/RS-422 Interfaces

●• Factory Automation

●• Motor/Motion Control

●• HVAC and Building Automation Networks

●• Networked Security Stations