LM25116MH/NOPB Datasheet PDF - TI

●The LM25116MH/NOPB is a current mode synchronous Buck Controller intended for step-down regulator applications from a high voltage or widely varying input supply. The control method is based upon current mode control utilizing an emulated current ramp. Current mode control provides inherent line feed-forward, cycle by cycle current limiting and ease of loop compensation. The use of an emulated control ramp reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of very small duty cycles necessary in high input voltage applications. The operating frequency is programmable from 50kHz to 1MHz. The LM25116 drives external high-side and low-side NMOS power switches with adaptive dead-time control. A user-selectable diode emulation mode enables discontinuous mode operation for improved efficiency at light load conditions. A low quiescent current shutdown disables the controller and consumes less than 10µA of total input current.

● Emulated peak current mode

● <10µA Low shutdown

● Drives standard or logic level MOSFETs

● Optional diode emulation mode

● Programmable current limit

● Programmable soft-start

● Programmable line under-voltage lockout

● Automatic switch to external bias supply

● Thermal shutdown protection

● Green product and no Sb/Br

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.