LTC1063CSW#PBF Datasheet PDF - Linear Technology

●The LTC1063CSW#PBF is a 5th Order Butterworth Lowpass Filter providing both clock-tunability, low DC output offset and over 12-bit DC accuracy. The filter cutoff frequency is controlled either by an internal or external clock. The clock-to-cut off frequency ratio is 100:1. The on-board clock is power supply independent and it is programmed via an external RC. The 50µVRMS clock feed through is considerably reduced over existing monolithic filters. The LTC1063 wideband noise is 95µVRMS and it can process large AC input signals with low distortion. With ±7.5V supplies, for instance, the filter handles up to 4VRMS (92dB S/N ratio) while the standard 1kHz THD is below 0.02%; 80dB dynamic ranges (S/N +THD) is obtained with input levels between 1VRMS and 2.3VRMS.

● Clock-tunable cutoff frequency

● 1mV DC Offset (typical)

● 80dB CMRR (typical)

● Internal or external clock

● 50µVRMS Clock feedthrough

● 100:1 Clock-to-cutoff frequency ratio

● 50kHz Maximum cutoff frequency

● Cascadable for faster roll-off

● Operates from ±2.375 to ±8V power supplies

● Self-clocking with 1 RC

● 95µVRMS Total wideband noise

● 0.01% THD at 2VRMS output level