MMG3014NT1 Datasheet PDF - NXP

●Overview

●The MMG3014NT1 is a General Purpose Amplifier that is internally input matched and internally output prematched. It is designed for a broad range of Class A, small-signal, high linearity, general purpose applications. It is suitable for applications with frequencies from 40 to 4000 MHz such as cellular, PCS, BWA, WLL, PHS, CATV, VHF, UHF, UMTS and general small-signal RF.

●MoreLess

●## Features

● Frequency: 40–4000 MHz

● P1dB: 25 dBm @ 900 MHz

● Small-Signal Gain: 19.5 dB @ 900 MHz

● Third Order Output Intercept Point: 40.5 dBm @ 900 MHz

● Single 5 Volt Supply

● Active Bias

● Cost-effective SOT-89 Surface Mount Package

● RoHS Compliant

● In Tape and Reel. T1 Suffix = 1000 Units, 12 mm Tape Width, 7 inch Reel.

●## Evaluation Kits

●Evaluation kits are available for the MMG3014N part to shorten your design cycle. These evaluation kits include a fully characterized evaluation board with data, circuit schematic, BOM and power-up sequence. Each evaluation kit is specific to an application frequency. For the MMG3014N there are three evaluation kits available:

● MMG3014N-EVKB1 for 2110-2170 MHz (used for Band 1)

● MMG3014N-EVKB3 for 1805-1880 MHz (used for Band 3)

● MMG3014N-EVKB7 for 2620-2690 MHz (used for Band 7)

●To select and purchase a kit refer to the Buy/Parametrics tab on this page or contact your local NXP® Distributor.

●## Reference Designs

●725-760 MHz, 1.0 W AVG., 12 V LTE Amplifier Lineup Reference Design

●2110-2170 MHz, 4.0 W AVG., 28 V W-CDMA Smart Demo Reference Design

●## Features

●2110-2170 MHz, 4.0 W AVG., 28 V W-CDMA Smart Demo Reference Design