MSP430L092SPWR Datasheet PDF - TI

●The MSP430L092SPWR is a 16-bit ultra-low-power Mixed-signal Microcontroller features a powerful 16-bit RISC MSP430 CPU, 16-bit registers and constant generators that contribute to maximum code efficiency. The architecture combined with five low-power modes, is optimized to achieve extended battery life. The digitally controlled oscillator (DCO) allows wake-up from low-power modes to active mode in less than 5µs. The device configurations with two 16-bit timer, 8-bit A/D converter, 8-bit D/A converter and 11 general-purpose I/O pins.

● 1MHz Internal trimmable high-frequency clock

● 20kHz Internal low-frequency clock source

● External clock input

● 16-bit Timer0_A3 with 3 Capture/Compare registers

● 16-bit Timer1_A3 with 3 Capture/Compare registers

● Programmable comparator (COMP)

● Supply voltage monitor (SVM)

● Temperature sensor

● Internal reference voltage source

● VOL Better than 0.15V at 2.5mA

● VOH Better than VCC -0.15V at 1mA

● Timer0 PWM signal available on all ports

● Timer1 PWM signal available on all ports

● ULV brownout circuit (BOR)

● ULV RAM retention voltage below BOR level

● 32-bit Watchdog timer (WDT-A)

● Bootstrap loader in MSP430L092 development/prototyping device

● Full 4-wire JTAG debug interface

● 45µA/MHz (1.3V) Active mode (AM) power consumption