OP90GSZ Datasheet PDF - ADI

●The OP90GSZ is a precision low-voltage micropower Operational Amplifier for use with battery-powered applications. The input voltage range includes the negative rail allowing the OP90 to accommodate input signals down to ground in a single-supply operation. The OP90"s output swing also includes a ground when operating from a single-supply, enabling zero-in, zero-out operation. The OP90 draws less than 20µA of quiescent supply current, while able to deliver over 5mA of output current to a load. The input offset voltage is below 150µV eliminating the need for external nulling. Gain exceeds 700000 and common-mode rejection is better than 100dB. The power supply rejection ratio of under 5.6µV/V minimizes offset voltage changes experienced in battery-powered systems. The low offset voltage and high gain offered by the OP90 bring precision performance to micropower applications.

● True single-supply operation

● Input and output voltage ranges include ground

● 20µA Maximum low supply current

● 5mA Minimum high output drive

● 150µV Maximum low input offset voltage

● 700V/mV Minimum high open-loop gain

● 5.6µV/V Maximum outstanding PSRR

●ESD sensitive device, electrostatic charges as high as 4000V readily accumulate on the human body and test equipment and can discharge without detection.