●Peripheral Features:
●• 16 I/O pins with individual direction control
●• High current sink/source for direct LED drive
●• Analog comparator module with:
●\- Two analog comparators
●\- Programmable on-chip voltage reference (VREF) module
●\- Programmable input multiplexing from device inputs and internal voltage reference
●\- Comparator outputs are externally accessible
●• Timer0: 8-bit timer/counter with 8-bit programmable prescaler
●• Timer1: 16-bit timer/counter with external crystal/clock capability
●• Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
●• Capture, Compare, PWM (CCP) module
●\- Capture is 16-bit, max. resolution is 12.5 ns
●\- Compare is 16-bit, max. resolution is 200 ns
●\- PWM max. resolution is 10-bit
●• Universal Synchronous/Asynchronous Receiver/Transmitter USART/SCI
●• 16 Bytes of common RAM Special Microcontroller Features:
●• Power-on Reset (POR)
●• Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
●• Brown-out Detect (BOD)
●• Watchdog Timer (WDT) with its own on-chip RC oscillator for reliable operation
●• Multiplexed MCLR-pin
●• Programmable weak pull-ups on PORTB
●• Programmable code protection
●• Low voltage programming
●• Power saving SLEEP mode
●• Selectable oscillator options
●\- FLASH configuration bits for oscillator options
●\- ER (External Resistor) oscillator
●• Reduced part count
●\- Dual speed INTRC
●• Lower current consumption
●\- EC External Clock input
●\- XT Oscillator mode
●\- HS Oscillator mode
●\- LP Oscillator mode
●• In-circuit Serial Programming™ (via two pins)
●• Four user programmable ID locations CMOS Technology:
●• Low power, high speed CMOS FLASH technology
●• Fully static design
●• Wide operating voltage range
●\- PIC16F627 - 3.0V to 5.5V
●\- PIC16F628 - 3.0V to 5.5V
●\- PIC16LF627 - 2.0V to 5.5V
●\- PIC16LF628 - 2.0V to 5.5V
●• Commercial, industrial and extended temperature range
●• Low power consumption
●\- < 2.0 mA @ 5.0V, 4.0 MHz
●\- 15µA typical @ 3.0V, 32 kHz
●\- < 1.0µA typical standby current @ 3.0V
