RE46C166S16F Datasheet PDF - Microchip

●Description

●The RE46C165/6/7/8 devices are low-power, CMOS photoelectric type, smoke detector ICs. With minimal external components, these circuits will provide all the required features for a photoelectric type smoke detector.

●Each design incorporates a gain selectable photo amplifier for use with an infrared emitter/detector pair. An internal oscillator strobes power to the smoke detection circuitry for 100 µs every 10 seconds to keep standby current to a minimum. If smoke is sensed, the detection rate is increased to verify an alarm condition. A high gain mode is available for push button chambertesting.

●Features

●• Temporal Horn Pattern or Continuous Tone

●• Alarm Memory

●• Sensitivity Control Times:

●   - 9 minutes (RE46C165/6)

●   - 1.2 minutes (RE46C167/8)

●• I/O Filter and Charge Dump

●• Interconnect up to 40 Detectors

●• Internal Power-on Reset

●• >2000V ESD Protection (HBM) on All Pins

●• Low Quiescent Current Consumption (<8 µA)

●• Internal Low Battery Detection and Chamber Test

●• RoHS Compliant Lead-Free Packaging