TCA6416ARTWR Datasheet PDF - TI

●The TCA6416ARTWR is a 16-bit I²C and SMBus I/O Expander provides 16-bit of general purpose parallel input/output (I/O) expansion for the two-line bidirectional I²C bus (or SMBus) protocol. The device can operate with a power supply voltage ranging from 1.65 to 5.5V on the I²C bus side (VCCI) and a power supply voltage ranging from 1.65 to 5.5V on the P-port side (VCCP). The device supports both 100kHz (standard-mode) and 400kHz (fast-mode) clock frequencies. The I/O expanders such as the TCA6416A provide a simple solution when additional I/Os are needed for switches, sensors, push-buttons, LEDs and fans, etc.

● I²C to Parallel port expander

● Allows bidirectional voltage-level translation and GPIO expansion

● Low standby current consumption of 3µA

● 5V Tolerant i/o ports

● 400kHz Fast I²C bus

● Active-low reset (RESET)\ input

● Open-drain active-low interrupt (INT)\ output

● Input/output configuration register

● Polarity inversion register

● Internal power-ON reset

● Power-up with all channels configured as inputs

● No glitch on power-up

● Noise filter on SCL/SDA input

● Latched outputs with high-current drive maximum capability for directly driving LEDs

● Latch-up performance exceeds 100mA per JESD 78, class II

● Green product and no Sb/Br

●Device has limited built-in ESD protection. The leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.