SJA1000T/N1,112 Datasheet PDF - NXP

●Overview

●The SJA1000 is a stand-alone controller for the Controller Area Network (CAN) used within automotive and general industrial environments. It is the successor of the PCA82C200 CAN controller (BasicCAN) from Philips Semiconductors. Additionally, a new mode of operation is implemented (PeliCAN) which supports the CAN 2.0B protocol specification with several new features.

●MoreLess

●## Features

● Pin compatibility to the PCA82C200 stand-alone CAN controller

● Electrical compatibility to the PCA82C200 stand-alone CAN controller

● PCA82C200 mode (BasicCAN mode is default)

● Extended receive buffer (64-byte FIFO)

● CAN 2.0B protocol compatibility (extended frame passive in PCA82C200 compatibility mode)

● Supports 11-bit identifier as well as 29-bit identifier

● Bit rates up to 1 Mbits/s

● PeliCAN mode extensions:

●\\- Error counters with read/write access

●\\- Programmable error warning limit

●\\- Last error code register

●\\- Error interrupt for each CAN-bus error

●\\- Arbitration lost interrupt with detailed bit position

●\\- Single-shot transmission (no re-transmission)

●\\- Listen only mode (no acknowledge, no active error flags)

●\\- Hot plugging support (software driven bit rate detection)

●\\- Acceptance filter extension (4-byte code, 4-byte mask)

●\\- Reception of ?own? messages (self reception request)

● 24 MHz clock frequency

● Interfaces to a variety of microprocessors

● Programmable CAN output driver configuration

● Extended ambient temperature range (-40 to +125 °C).

●## Features