SN74AVC32T245ZKER Datasheet PDF - TI

●The SN74AVC32T245ZKER is a 32-bit dual-supply Bus Transceiver with configurable voltage translation and 3-state outputs. It uses two separate configurable power-supply rails. The SN74AVC32T245 device is optimized to operate with VCCA/VCCB set from 1.4 to 3.6V. It is operational with VCCA/VCCB as low as 1.2V. The A port is designed to track VCCA. VCCA and accepts any supply voltage from 1.2 to 3.6V. The B port is designed to track VCCB. VCCB and accepts any supply voltage from 1.2 to 3.6V. It is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The OE\ input can disable the outputs so the buses are effectively isolated. This device is fully specified for partial-power-down applications using Ioff.

● Member of the Texas Instruments Widebus+™ family

● Control inputs VIH/VIL levels referenced to VCCA voltage

● VCC Isolation feature - If either VCC input is at GND, both ports are in the high-impedance state

● Overvoltage-tolerant inputs/outputs allow mixed-voltage-mode data communications

● Fully configurable dual-rail design

● Ioff Supports partial-power-down mode operation

● 4.6V Tolerant I/Os

● Latch-up performance exceeds 100mA per JESD 78, Class II

● Green product and no Sb/Br