SN74HCT573DBR Datasheet PDF - TI

●The SN74HCT573DBR is an octal transparent D Latch with 3-state outputs. It is designed specifically for driving highly capacitive or relatively low-impedance loads. It is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers and working registers. While the latch-enable input is high, the Q outputs respond to the data inputs. When LE is low, the outputs are latched to retain the data that was set up at the D inputs. A buffered OE input can be used to place the eight outputs in either a normal logic state or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state and increased drive provide the capability to drive bus lines without interface or pull-up components. OE\ does not affect the internal operations of the latches.

● High-current 3-state outputs drive bus lines directly or up to 15 LSTTL loads

● 80µA Maximum low power consumption

● 21ns Typical tpd

● ±6mA Output drive at 5V

● 1µA Maximum low input current

● Inputs are TTL-voltage compatible

● Bus-structured pinout

● Green product and no Sb/Br