SN74LVT125PWR Datasheet PDF - TI

●description/ordering information

●This bus buffer is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

●The SN74LVT125 features independent line drivers with 3-state outputs. Each output is in the high-impedance state when the associated output-enable (OE) input is high.

●Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

●This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down.

●• Supports Mixed-Mode Signal Operation

●   (5-V Input and Output Voltages With 3.3-V VCC)

●• Supports Unregulated Battery Operation Down to 2.7 V

●• Typical VOLP (Output Ground Bounce)

●   <0.8 V at VCC = 3.3 V, TA = 25°C

●• Ioff Supports Partial-Power-Down Mode Operation

●• Bus-Hold Data Inputs Eliminate the Need for External Pullup Resistors

●• Latch-Up Performance Exceeds 500 mA Per JEDEC Standard JESD-17

●• ESD Protection Exceeds JESD 22

●   − 2000-V Human-Body Model (A114-A)

●   − 200-V Machine Model (A115-A)