SN74LVTH245APW Datasheet PDF - TI

●The SN74LVTH245APW is an octal Bus Transceiver designed specifically for low-voltage (3.3V) VCC operation, but with the capability to provide a TTL interface to a 5V system environment. It is designed for asynchronous communication between data buses. It transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pull-up resistor and the minimum value of the resistor is determined by the current-sinking capability of the driver. Active bus-hold circuitry is provided to hold unused or floating data inputs at a valid logic level. Use of pull-up/pull-down resistors with the bus-hold circuitry is not recommended. It is fully specified for hot-insertion applications using IOFF and power-up 3-state.

● Support mixed-mode signal operation

● IOFF and power-up 3-state support hot insertion

● Bus hold on data inputs eliminates the need for external pull-up/pull-down resistors

● Support unregulated battery operation down to 2.7V

● Latch-up performance exceeds 500mA per JESD 17

● <0.8V at VCC = 3.3V, TA = 25°C VOLP (output ground bounce)

● Green product and no Sb/Br