●The STM32F072CBT6 is a Microcontroller incorporates the high-performance ARM® Cortex®-M0 32-bit RISC core operating at a 48MHz frequency, high-speed embedded memories (up to 128kb of flash memory and 16kb of SRAM) and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I²Cs, two SPIs/one I2S, one HDMI CEC and four USARTs), one USB Full speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven general-purpose 16-bit timers, a 32-bit timer and an advanced-control PWM timer. The STM32F072CBT6 microcontroller operates in the -40 to +85°C and -40 to +105°C temperature ranges from a 2.0 to 3.6V power supply. A comprehensive set of power-saving modes allows the design of low-power applications.
● ARM® 32-bit Cortex®-M0 CPU, Frequency up to 48MHz Core
● 64 to 128kb Flash Memory
● 16kb SRAM with HW Parity
● CRC Calculation Unit
● VDDA = VDD to 3.6V Analogue Supply
● Power-on/Power Down Reset (POR/PDR)
● Sleep, Stop and Standby Low Power Modes
● 4 to 32MHz Crystal Oscillator
● 32kHz Oscillator for RTC with Calibration
● Internal 8MHz RC with x6 PLL Option
● Internal 48MHz Oscillator with Automatic Trimming Based on External Synchronization
● All Mappable on External Interrupt Vectors
● Up to 68 I/Os with 5V Tolerant Capability
● 7-channel DMA Controller
● One 12-bit, 1.0µs ADC (up to 16 Channels)
● 0 to 3.6V Conversion Range
● Calendar RTC with Alarm and Periodic Wakeup from Stop/Standby
● One 16-bit Advanced-control Timer for 6-channel PWM Output
● 32-bit and Seven 16-bit Timers, with up to 4 IC/OC OCN usable for IR control decoding or DAC control
● Independent and System Watchdog Timers
●Based on three different tests (ESD, LU) using specific measurement methods, the device is stressed in order to determine its performance in terms of electrical sensitivity.
Part 3D Model
