STM32F072 Datasheet PDF

●The STM32F072RBT6 is a Microcontroller incorporates the high-performance ARM Cortex®-M0 32-bit RISC core operating at a 48MHz frequency, high-speed embedded memories (up to 128kb of flash memory and 16kb of SRAM) and an extensive range of enhanced peripherals and I/Os. All devices offer standard communication interfaces (two I²Cs, two SPIs/one I2S, one HDMI CEC and four USARTs), one USB Full speed device (crystal-less), one CAN, one 12-bit ADC, one 12-bit DAC with two channels, seven general-purpose 16-bit timers, a 32-bit timer and an advanced-control PWM timer. A comprehensive set of power-saving modes allows the design of low-power applications.

● ARM® 32-bit Cortex®-M0 CPU, Frequency up to 48MHz Core

● 64 to 128kb Flash Memory

● 16kb SRAM with HW Parity

● CRC Calculation Unit

● VDDA = VDD to 3.6V Analogue Supply

● Power-on/Power Down Reset (POR/PDR)

● Sleep, Stop and Standby Low Power Modes

● 4 to 32MHz Crystal Oscillator

● 32kHz Oscillator for RTC with Calibration

● Internal 8MHz RC with x6 PLL Option

● Internal 48MHz Oscillator with Automatic Trimming Based on External Synchronization

● All Mappable on External Interrupt Vectors

● Up to 68 I/Os with 5V Tolerant Capability and 19 with Independent Supply VDDIO2

● 7-channel DMA Controller

● One 12-bit, 1.0µs ADC (up to 16 Channels)

● 0 to 3.6V Conversion Range

● Calendar RTC with Alarm and Periodic Wakeup from Stop/Standby

● One 16-bit Advanced-control Timer for 6-channel PWM Output

● 32-bit and Seven 16-bit Timers, with up to 4 IC/OC OCN usable for IR control decoding or DAC control

● Independent and System Watchdog Timers

●Based on three different tests (ESD, LU) using specific measurement methods, the device is stressed in order to determine its performance in terms of electrical sensitivity.