●The STM8S007C8 value line 8-bit microcontrollers offer 64 Kbytes Flash program memory. They are referred to as high-density devices in the STM8S microcontroller family reference manual (RM0016).
●The STM8S007C8 value line devices provide the following benefits: reduced system cost, performance, robustness, short development cycles, and product longevity.
●The system cost is reduced thanks to a true data EEPROM for up to 100 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog, and brown-out reset.
●Device performance is ensured by 20 MIPS at 24 MHz CPU clock frequency and enhanced characteristics which include robust I/O, independent watchdogs (with a separate clock source), and a clock security system.
●Short development cycles are guaranteed due to application scalability across a common family product architecture with compatible pinout, memory map and modular peripherals. Full documentation is offered with a wide choice of development tools.
●Product longevity is ensured in the STM8S family thanks to their advanced core which is made in a state-of-the art technology for applications with 2.95 V to 5.5 V operating supply.
●Key Features
● Core
● Max fCPU : up to 24 MHz, 0 wait states @ fCPU ≤ 16 MHz
● Advanced STM8 core with Harvard architecture and 3-stage pipeline
● Extended instruction set
● Max 20 MIPS @ 24 MHz
● Memories
● Program: 64 Kbytes Flash; data retention 20 years at 55 °C after 100 cycles
● Data: 128 bytes true data EEPROM; endurance 100 kcycles
● RAM: 6 Kbytes
● Clock, reset and supply management
● 2.95 to 5.5 V operating voltage
● Low power crystal resonator oscillator
● External clock input
● Internal, user-trimmable 16 MHz RC
● Internal low power 128 kHz RC
● Clock security system with clock monitor
● Wait, active-halt, & halt low power modes
● Peripheral clocks switched off individually
● Permanently active, low consumption power-on and power-down reset
● Interrupt management
● Nested interrupt controller with 32 interrupts
● Up to 37 external interrupts on 6 vectors
● Timers
● 2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)
● Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization
● 8-bit basic timer with 8-bit prescaler
● Auto wakeup timer
● Window watchdog, independent watchdog
● Communications interfaces
● UART with clock output for synchronous operation - LIN master mode
● UART with LIN 2.1 compliant, master/slave modes and automatic resynchronization
● SPI interface up to 10 Mbit/s
● I2 C interface up to 400 Kbit/s
● 10-bit ADC with up to 16 channels
● I/Os
● 38 I/Os including 16 high sink outputs
● Highly robust I/O design, immune against current injection
● Development support
● Single wire interface module (SWIM) and debug module (DM)
Part 3D Model
