●The TMS320F240 (F240) device is a member of a family of DSP controllers based on the TMS320C2xx generation of 16-bit fixed-point digital signal processors (DSPs). This family is optimized for digital motor/motion control applications. The DSP controllers combine the enhanced TMS320 architectural design of the C2xLP core CPU for low-cost, high-performance processing capabilities and several advanced peripherals optimized for motor/motion control applications. These peripherals include the event manager module, which provides general-purpose timers and compare registers to generate up to 12 PWM outputs, and a dual10-bit analog-to-digital converter (ADC), which can perform two simultaneous conversions within 6.1us. See the functional block diagram.
● High-Performance Static CMOS Technology
● Includes the T320C2xLP Core CPU
● Object Compatible With the TMS320C2xx
● Source Code Compatible With TMS320C25
● Upwardly Compatible With TMS320C5x
● 132-Pin Plastic Quad Flat Package (PQ Suffix)
● 50-ns Instruction Cycle Time
● Industrial and Automotive Temperature Available
● Memory
● 544 Words × 16 Bits of On-Chip Data/Program Dual-Access RAM
● 16K Words × 16 Bits of On-Chip Program Flash EEPROM
● 224K Words × 16 Bits of Total Memory Address Reach (64K Data, 64K Program and 64K I/O, and 32K Global Memory Space)
● Event-Manager Module
● 12 Compare/Pulse-Width Modulation (PWM) Channels
● Three 16-Bit General-Purpose Timers With Six Modes, Including Continuous Upand Up/Down Counting
● Three 16-Bit Full-Compare Units With Deadband
● Three 16-Bit Simple-Compare Units
● Four Capture Units (Two With Quadrature Encoder-Pulse Interface Capability)
● Dual 10-Bit Analog-to-Digital Conversion Module
● 28 Individually Programmable, Multiplexed I/O Pins
● Phase-Locked-Loop (PLL)-Based Clock Module
● Watchdog Timer Module (With Real-Time Interrupt)
● Serial Communications Interface (SCI) Module
● Serial Peripheral Interface (SPI) Module
● Six External Interrupts (Power Drive Protect, Reset, NMI, and Three Maskable Interrupts)
● Four Power-Down Modes for Low-Power Operation
● Scan-Based Emulation
● Development Tools Available:
● Texas Instruments (TI) ANSI C Compiler, Assembler/Linker, and C-Source Debugger
● Scan-Based Self-Emulation (XDS510)
● Third-Party Digital Motor Control and Fuzzy-Logic Development Support
●XDS510 is a trademark of Texas Instruments. Other trademarks are the property of their respective owners.
