TPD12S521DBTR Datasheet PDF - TI

●The TPD12S521DBTR is a HDMI Transmitter Port Protection and Interface Device, single-chip electro-static discharge (ESD) circuit protection device for the high-definition multimedia interface (HDMI) transmitter port. While providing ESD protection with transient voltage suppression (TVS) diodes, the TVS protection adds little or no additional glitch in the high-speed differential signals. The high-speed transition minimized differential signalling (TMDS) ESD protection lines add only 0.8-pF capacitance. The low-speed control lines offer voltage-level shifting to eliminate the need for an external voltage level-shifter IC. The control line TVS diodes add 3.5pF capacitance to the control lines. The 38-pin DBT package offers a seamless layout routing option to eliminate the routing glitch for the differential signal pairs. The DBT package pitch (0.5mm) matches with the HDMI connector pitch. In addition, the pin mapping follows the same order as the HDMI connector pin mapping.

● IEC 61000-4-2 Level 4 ESD protection, ±8kV contact discharge on external lines

● Single-chip ESD solution for HDMI driver

● On-chip current regulator with 55mA current output

● Supports all HDMI 1.3 and HDMI 1.4 data rates (-3dB frequency >3GHz)

● 0.8pF Capacitance for high speed TMDS lines

● 0.05pF Matching capacitance between differential signal pair

●IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.