●DESCRIPTION
●The TPS542941 is a dual, adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS542941 enables system designers to complete the suite of various end equipment’s power bus regulators with a cost effective, low component count, and low standby current solution. The main control loops of the TPS542941 use the D-CAP2™ mode control which provides a very fast transient response with no external compensation components.
●FEATURES
●• D-CAP2™ Control Mode
●– Fast Transient Response
●– No External Parts Required For Loop Compensation
●– Compatible with Ceramic Output Capacitors
●• Wide Input Voltage Range : 4.5 V to 18 V
●• Output Voltage Range : 0.76V to 7V
●• Highly Efficient Integrated FETs Optimized for Low Duty Cycle Applications
●– 150 mΩ (High Side) and 100 mΩ (Low Side)
●• High Initial Reference Accuracy
●• 2A CH1 / 3A CH2 Continuous Load Current
●• Low-Side rDS(on) Loss-Less Current Sensing
●• Fixed Soft Start : 1.0ms
●• Non-Sinking Pre-Biased Soft Start
●• Powergood
●• 700 kHz Switching Frequency
●• Cycle-by-Cycle Over-Current Limit Control
●• OCL/UVLO/TSD Protections
●• Hiccup Timer for Overload Protection
●• Adaptive Gate Drivers with Integrated Boost PMOS Switch
●• OCP Constant Due To Thermally Compensated rDS(on) with 4000ppm/℃
●• 16-Pin HTSSOP
●• Auto-Skip Eco-mode™ for High Efficiency at Light Load
●APPLICATIONS
●• Point-of-Load Regulation in Low Power Systems for Wide Range of Applications
●– Digital TV Power Supply
●– Networking Home Terminal
●– Digital Set Top Box (STB)
●– DVD Player/Recorder
●– Gaming Consoles and Other
