●As a member of the SWIFT family of DC/DC regulators, the TPS5450 is a high-output-current PWM converter that integrates a low-resistance high-side N-channel MOSFET. Included on the substrate with the listed features are a high-performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions, an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V, an internally set slow-start circuit to limit inrush currents, and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 µA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection, and thermal shutdown. To reduce design complexity and external component count, the TPS5450 feedback loop is internally compensated.
●The TPS5450 device is available in a thermally enhanced, 8-pin SOIC PowerPAD package. TI provides evaluation modules and software tools to aid in achieving high-performance power supply designs to meet aggressive equipment development cycles.
● Qualified for Automotive Applications
● Wide Input Voltage Range: 5.5 V to 36 V
● Up to 5-A Continuous (6-A Peak) Output Current
● High Efficiency Greater than 90% Enabled by
●110-m Integrated MOSFET Switch
● Wide Output Voltage Range: Adjustable Down to
●1.22 V with 1.5% Initial Accuracy
● Internal Compensation Minimizes External
●Parts Count
● Fixed 500-kHz Switching Frequency for Small
●Filter Size
● 18-µA Shutdown Supply Current
● Improved Line Regulation and Transient Response
●by Input Voltage Feed Forward
● System Protected by Overcurrent Limiting,
●Overvoltage Protection, and Thermal Shutdown
● Available in Small Thermally Enhanced 8-Pin
●SOIC PowerPAD Package
● For SWIFT Documentation, Application Reports
●and Design Software, See the TI Website at www.ti.com/swift
● APPLICATIONS
● High-Density Point-of-Load Regulators
● LCD Displays, Plasma Displays
● Battery Chargers
● 12-V/24-V Distributed Power Systems
● SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
● Controlled Baseline
● One Assembly/Test Site
● One Fabrication Site
● Available in Military (55°C/125°C) Temperature Range(1)
● Extended Product Life Cycle
● Extended Product-Change Notification
● Product Traceability
●(1) Additional temperature ranges are available - contact factory
Part 3D Model
