TPS72515DCQ Datasheet PDF - TI

●The TPS72515DCQ is a 1.5V fixed output low-dropout (LDO) Linear Regulator. The integrated supervisory circuitry provides an active low RESET\ signal when the output falls out of regulation. The no capacitor/any capacitor feature allows the customer to tailor output transient performance as needed. Therefore, compared to other regulators capable of providing the same output current, this family of regulators can provide a stand-alone power supply solution or a post regulator for a switch mode power supply. The family operates over a wide range of input voltages (1.8 to 6V) and has very low dropout. Ground current is typically 210µA at full load and drops to less than 80µA at no load. Standby current is less than 1µA. Although an output capacitor is not required for stability, transient response and output noise are improved with a 10µF output capacitor.

● Stable with any type/value output capacitor

● Integrated supervisor (SVS) with 50ms RESET delay time

● ±2% Output voltage tolerance over line, load and temperature

● Integrated UVLO

● Thermal and overcurrent protection