LMH6639MF Datasheet PDF - TI

●The LMH6639MF is a 190MHz Rail-to-Rail Output feedback Operational Amplifier with disable. Employing TI"s patented VIP10 process, the LMH6639 delivers a bandwidth of 190MHz at a current consumption of only 3.6mA. An input common mode voltage range extending to 0.2V below the V and to within 1V of V+, makes the op-amp a true single supply op-amp. The output voltage range extends to within 30mV of either supply rail providing the user with a dynamic range that is especially desirable in low voltage applications. The op-amp offers a slew rate of 172V/µs resulting in a full power bandwidth of approximately 28MHz. The op-amp also offers protection for the input transistors by using two anti-parallel diodes and a series resistor connected across the inputs. The TON value of 83nsec combined with a settling time of 33nsec makes this device ideally suited for multiplexing applications. Careful attention has been paid to ensure device stability under all operating voltages and modes.

● 33ns Settling time

● 110mA Linear output current

● -60dBc Total harmonic distortion

● No output phase reversal with CMVR exceeded

● Excellent overdrive recovery

● 0.12% Differential gain

● 0.045° Differential phase

●This device has limited built-in ESD protection, leads should be shorted together or the device placed in conductive foam during storage or handling to prevent electrostatic damage to the MOS gates.