ZSC31050KIT Datasheet PDF - Zentrum Mikroelektronik Dresden

●The ZSC31050KIT is an evaluation kit containing software and hardware needed for communication and calibration of ZSC31050 advanced differential sensor signal conditioner. The ZSC31050 is a CMOS integrated circuit for highly accurate amplification and sensor specific correction of bridge sensor and temperature sensor signals. A PC can communicate with the ZSC31050 via the communication board (SSC CB) through a USB connection. The sensor replacement board (SRB) provides a replacement for an actual sensor and can be used for the first step of calibration or a dry run calibration. On the SRB, the sensor replacement signal is controlled by a potentiometer. The software will run under Windows 98/ME/XP/NT/Vista/Windows 7 operation systems after installation of a USB driver. The main purpose of the SSC evaluation kit is communication between the PC and the ZSC31050.

● Digital compensation of sensor offset, sensitivity, temperature drift and non linearity

● Accommodates nearly all bridge sensor types

● Digital one shot calibration: quick and precise

● Selectable compensation temperature T1 source

● Adjustable output resolution (up to 15bits) versus sampling rate (up to 3.9KHz)

● Current consumption typically 2.5mA

● Selectable bridge excitation: ratiometric voltage, constant voltage or constant current

● Input channel for separate temperature sensor

● No external trimming components required

● PC controlled configuration and calibration via digital bus interface - simple, low cost

●This evaluation kit is designed for sensor module evaluation, laboratory setup and module calibration development only and it must not be used for module production and production test setups.