OPA2340 Datasheet PDF

●The OPA2340UA is a rail-to-rail CMOS Operational Amplifier, optimized for low-voltage, single-supply operation. Rail-to-rail input/output and high-speed operation make them ideal for driving sampling analogue-to-digital (A/D) converters. They are also well-suited for general purpose and audio applications as well as providing I/V conversion at the output of digital-to-analogue (D/A) converters. Single, dual and quad versions have identical specifications for design flexibility. It operates on a single supply as low as 2.5V with an input common-mode voltage range that extends 500mV below ground and 500mV above the positive supply. Output voltage swing is to within 1mV of the supply rails with a 100k load. They offer excellent dynamic response (BW = 5.5MHz, SR = 6V/µs), yet quiescent current is only 750µA. Dual and quad designs feature completely independent circuitry for lowest crosstalk and freedom from interaction.

● Rail-to-rail input

● Rail-to-rail output (within 1mV)

● 5.5MHz Wide bandwidth

● 6V/µs High slew rate

● 0.0007% (f = 1kHz) Low THD + N

● 750µA Low quiescent current per channel

● Green product and no Sb/Br

●IC can be damaged by ESD. We recommend that all ICs be handled with appropriate precautions. Failure to observe proper handling and installation procedures can cause damage.