STM8S207 Datasheet PDF

●The STM8S20xxx performance line 8-bit microcontrollers offer from 32 to 128 Kbytes Flash program memory. They are referred to as high-density devices in the STM8S microcontroller family reference manual.

●All STM8S20xxx devices provide the following benefits: reduced system cost, performance robustness, short development cycles, and product longevity.

●The system cost is reduced thanks to an integrated true data EEPROM for up to 300 k write/erase cycles and a high system integration level with internal clock oscillators, watchdog, and brown-out reset.

●Device performance is ensured by 20 MIPS at 24 MHz CPU clock frequency and enhanced characteristics which include robust I/O, independent watchdogs (with a separate clock source), and a clock security system.

●Short development cycles are guaranteed due to application scalability across a common family product architecture with compatible pinout, memory map and modular peripherals. Full documentation is offered with a wide choice of development tools.

●Product longevity is ensured in the STM8S family thanks to their advanced core which is made in a state-of-the art technology for applications with 2.95 V to 5.5 V operating supply.

●Key Features

● Core

● Max fCPU : up to 24 MHz, 0 wait states @ fCPU ≤ 16 MHz

● Advanced STM8 core with Harvard architecture and 3-stage pipeline

● Extended instruction set

● Max 20 MIPS @ 24 MHz

● Memories

● Program: up to 128 Kbytes Flash; data retention 20 years at 55 °C after 10 kcycles

● Data: up to 2 Kbytes true data EEPROM; endurance 300 kcycles

● RAM: up to 6 Kbytes

● Clock, reset and supply management

● 2.95 to 5.5 V operating voltage

● Low power crystal resonator oscillator

● External clock input

● Internal, user-trimmable 16 MHz RC

● Internal low power 128 kHz RC

● Clock security system with clock monitor

● Wait, active-halt, & halt low power modes

● Peripheral clocks switched off individually

● Permanently active, low consumption power-on and power-down reset

● Interrupt management

● Nested interrupt controller with 32 interrupts

● Up to 37 external interrupts on 6 vectors

● Timers

● 2x 16-bit general purpose timers, with 2+3 CAPCOM channels (IC, OC or PWM)

● Advanced control timer: 16-bit, 4 CAPCOM channels, 3 complementary outputs, dead-time insertion and flexible synchronization

● 8-bit basic timer with 8-bit prescaler

● Auto wakeup timer

● Window watchdog, independent watchdog

● Communications interfaces

● High speed 1 Mbit/s active beCAN 2.0B

● UART with clock output for synchronous operation - LIN master mode

● UART with LIN 2.1 compliant, master/slave modes and automatic resynchronization

● SPI interface up to 10 Mbit/s

● I2 C interface up to 400 Kbit/s

● 10-bit ADC with up to 16 channels

● I/Os

● Up to 68 I/Os on an 80-pin package including 18 high sink outputs

● Highly robust I/O design, immune against current injection

● Development support

● Single wire interface module (SWIM) and debug module (DM)

● 96-bit unique ID key for each device