TLV2772 Datasheet PDF

●The TLV277x CMOS operational amplifier family combines high slew rate and bandwidth, rail-to-rail output swing, high output drive, and excellent dc precision. The device provides 10.5 V/µs of slew rate and 5.1 MHz of bandwidth while only consuming 1 mA of supply current per channel. This ac performance is much higher than current competitive CMOS amplifiers. The rail-to-rail output swing and high output drive make these devices a good choice for driving the analog input or reference of analog-to-digital converters. These devices also have low distortion while driving a 600- load for use in telecom systems.

●These amplifiers have a 360-µV input offset voltage, a 17 nV/Hz input noise voltage, and a 2-pA input bias current for measurement, medical, and industrial applications. The TLV277x family is also specified across an extended temperature range (–40°C to 125°C), making it useful for automotive systems, and the military temperature range (–55°C to 125°C), for military systems.

●These devices operate from a 2.5-V to 5.5-V single supply voltage and are characterized at 2.7 V and 5 V. The single-supply operation and low power consumption make these devices a good solution for portable applications. The following table lists the packages available.

● High Slew Rate...10.5 V/µs Typ

● High-Gain Bandwidth...5.1 MHz Typ

● Supply Voltage Range 2.5 V to 5.5 V

● Rail-to-Rail Output

● 360 µV Input Offset Voltage

● Low Distortion Driving 600- 0.005% THD+N

● 1 mA Supply Current (Per Channel)

● 17 nV/Hz Input Noise Voltage

● 2 pA Input Bias Current

● Characterized From TA = –55°C to 125°C

● Available in MSOP and SOT-23 Packages

● Micropower Shutdown Mode...IDD < 1 µA

● Available in Q-Temp Automotive

●High Reliability Automotive Applications

●Configuration Control / Print Support

●Qualification to Automotive Standards