●The TNY266PN integrates a 700V power MOSFET, oscillator, high voltage switched current source, current limit and thermal shutdown circuitry onto a monolithic device. The start up and operating power are derived directly from the voltage on the DRAIN pin, eliminating the need for a bias winding and associated circuitry. In addition, the TNY266PN incorporates auto-restart, line undervoltage sense, and frequency jittering. An innovative design minimises audio frequency components in the simple ON/OFF control scheme to practically eliminate audible noise with standard taped/varnished transformer construction. The fully integrated auto-restart circuit safely limits output power during fault conditions such as output short circuit or open loop, reducing component count and secondary feedback circuitry cost.
● Fully integrated auto-restart for short circuit and open loop fault protection
● Built in circuitry practically eliminates audible noise with ordinary dip-varnished transformer
● Programmable line under voltage detect feature prevents power on/off glitches
● Frequency jittering dramatically reduces EMI (~10dB)
● 132kHz operation reduces transformer size
● Very tight tolerances and negligible temperature variation on key parameters
● Low component count switcher solution
● Simple ON/OFF control - no loop compensation needed
● No bias winding
● Simple design practically eliminates rework in manufacturing
● No load consumption <50mW with bias winding and <250mW without bias winding at 265VAC input
● High bandwidth provides fast turn on with no overshoot
● Current limit operation rejects line frequency ripple
● Built in current limit and thermal protection improves safety
