●The DAC8551 is a small, low-power, voltage output, 16-bit digital-to-analog converter (DAC). It is monotonic, provides good linearity, and minimizes undesired code-to-code transient voltages. The DAC8551 uses a versatile 3-wire serial interface that operates at clock rates to 30 MHz and is compatible with standard SPI™, QSPI™, Microwire™, and digital signal processor (DSP) interfaces.
●The DAC8551 requires an external reference voltage to set its output range. The DAC8551 incorporates a power-on-reset circuit that ensures the DAC output powers up at 0 V and remains there until a valid write takes place to the device. The DAC8551 contains a power-down feature, accessed over the serial interface, that reduces the current consumption of the device to 200 nA at 5 V.
●The low-power consumption of this device in normal operation makes it ideally suited for portable, battery-operated equipment. The power consumption is 0.38 mW at 2.7 V, reducing to less than 1 µW in power-down mode.
●For additional flexibilty, see the DAC8550 (SLAS476), a 2′s complement-input counterpart to the DAC8551.
● Relative Accuracy: 3LSB
● Glitch Energy: 0.1 nV-s
● _Micro_Power Operation: 140 µA at 2.7 V
● Power-On Reset to Zero
● Power Supply: 2.7 V to 5.5 V
● 16-Bit Monotonic Over Temperature
● Settling Time: 10 µs to ±0.003% FSR
● Low-Power Serial Interface with
●Schmitt-Triggered Inputs
● On-Chip Output Buffer Amplifier with
●Rail-to-Rail Operation
● Power-Down Capability
● Binary Input
● SYNC Interrupt Facility
● Drop-In Compatible With DAC85x1
●and DAC8550 (2′s Complement Input)
