●The ADS5400 is a 12-bit, 1-GSPS analog-to-digital converter (ADC) that operates from both a 5-V supply and 3.3-V supply, while providing LVDS-compatible digital outputs. The analog input buffer isolates the internal switching of the track and hold from disturbing the signal source. The simple 3-stage pipeline provides extremely low latency for time critical applications. Designed for the conversion of signals up to 2 GHz of input frequency at 1 GSPS, the ADS5400 has outstanding low noise performance and spurious-free dynamic range over a large input frequency range.
●The ADS5400 is available in a 100-Pin Ceramic Nonconductive Tie-Bar Package. The combination of the ceramic package and moderate power consumption of the ADS5400 allows for operation without an external heatsink. The ADS5400 is built on Texas Instruments complementary bipolar process (BiCom3) and is specified over the full military temperature range (–55°C to 125°C Tcase).
● 1-GSPS Sample Rate
● 12-Bit Resolution
● 2.1 GHz Input Bandwidth
● SFDR = 65 dBc at 1.2 GHz
● SNR = 57 dBFS at 1.2 GHZ
● 7 Clock Cycle Latency
● Interleave Friendly: Internal Adjustments for Gain,
●Phase and Offset
● 1.5 2 VPP Differential Input
●Voltage, Programmable
● LVDS-Compatible Outputs, 1 or 2 Bus Options
● Total Power Dissipation: 2.2 W
● On-Chip Analog Buffer
● 100-Pin Ceramic Nonconductive Tie-Bar Package
● Military Temperature Range
●(–55°C to 125°C Tcase)
● Processed Per Internal QML Class V Assembly/Test Flow
● QML Class V Qualified, SMD 5962-09240
● APPLICATIONS
● Test and Measurement Instrumentation
● Ultra-Wide Band Software-Defined Radio
● Data Acquisition
● Power Amplifier Linearization
● Signal Intelligence and Jamming
● Radar
● Engineering Evaluation (/EM) Samples are Available(1)
●(1) These units are intended for engineering evaluation only. They are processed to a non-compliant flow (e.g. no burn-in, etc.) and are tested to temperature rating of 25°C only. These units are not suitable for qualification, production, radiation testing or flight use. Parts are not warranted for performance on full MIL specified temperature range of 55°C to 125°C or operating life.
