SN74LV8153N Datasheet PDF - TI

●The SN74LV8153N is a serial-to-parallel Data Converter accepts serial input data and outputs 8-bit parallel data. The automatic data-rate detection feature of the SN74LV8153 eliminates the need for an external oscillator and helps with cost and board real-estate savings. The OUTSEL pin is used to choose between open collector and push-pull outputs. The open-collector option is suitable when this device is used in applications such as LED interface, where high drive current is required. SOUT is the output that acknowledges reception of the serial data. To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC1 through a pull-up resistor, the minimum value of the resistor is determined by the current-sinking capability of the driver.

● Single-wire serial data input

● Compatible with UART serial-data format

● Up to 40mA current drive in open-collector mode for driving LEDs

● Outputs can be configured as open-collector or push-pull

● Internal oscillator and counter for automatic data-rate detection

● Latch-up performance exceeds 250mA per JESD 17