Web Analytics
Part Datasheet Search > RF Transmitters > MAX1472 Datasheet PDF
Images are for reference

MAX1472 Datasheet PDF

Part Series:
MAX1472 Series
Category:
RF Transmitters
Description:
RF Transmitter ASK 300MHz ~ 450MHz 7.3dBm ~ 16.2dBm 100kbps PCB, Surface Mount Antenna SOT-23-8
Updated Time: 2023/01/13 02:45:57 (UTC + 8)

MAX1472 RF Transmitters Datasheet PDF

MAX1472 Datasheet PDF RF Transmitters

18 Pages
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX14722ATP+ Special Function IC, Power Limiter & Undervoltage Protection Device, 5.5V to 58V in, TQFN-20
12 Pages
Maxim Integrated
Evaluation Board, Multiplexer
12 Pages
Maxim Integrated
MAXIM INTEGRATED PRODUCTS MAX14724ETP+ Analog Multiplexer, 8:4, 1 Circuit, 5Ω, 1.6V to 5.5V, TQFN-20
12 Pages
Maxim Integrated
IC RF TRANSMITTER 16TQFN
10 Pages
Maxim Integrated
RF Transmitter ASK 300MHz ~ 450MHz 7.3dBm ~ 16.2dBm 100kbps PCB, Surface Mount Antenna SOT-23-8
9 Pages
Maxim Integrated
MAX14721 Adjustable Power Limiters Evaluation Kit
9 Pages
Maxim Integrated
Evaluation Kit Allows For A Detailed Evaluation Of The MAX1472 ASK Transmitter
9 Pages
Maxim Integrated
RF Transmitter 300MHz-to-450MHz Low-Power, Crystal-Based ASK Transmitter
9 Pages
Maxim Integrated
Low-Power Crystal-Based Ask Transmitter 8Pin SOT-23
9 Pages
Maxim Integrated
RF Development Tools MAX1472 Eval Kit
9 Pages
Maxim Integrated
Evaluation Kit Allows For A Detailed Evaluation Of The MAX1472 ASK Transmitter
9 Pages
Maxim Integrated
Low-Power Crystal-Based Ask Transmitter 8Pin SOT-23

MAX1472AKA+T - Maxim Integrated Specifications

TYPE
DESCRIPTION
Mounting Style
Surface Mount
Frequency
300MHz ~ 450MHz
Number of Pins
8 Pin
Supply Voltage (DC)
3.60V (max)
Case/Package
SOT-23-8
show more

MAX1472AKA+T - Maxim Integrated Function Overview

The MAX1472AKA+T is a 300MHz to 450MHz, low power, crystal based ASK transmitter in 8 pin SOT-23 package. This highly integrated crystal referenced phase locked loop (PLL) VHF/UHF transmitter designed to transmit OOK/ASK data in 300MHz to 450MHz frequency range. The MAX1472 supports data rates up to 100Kbps and adjustable output power to more than +10dBm in to 50 ohm load. The crystal based architecture of MAX1472 eliminates many of the common problems with SAW transmitters by providing greater modulation depth, faster frequency settling, higher tolerance of transmit frequency and reduced temperature dependence. These improvements enable better overall receiver performance when using a superheterodyne receiver such as MAX1470 or MAX1473. The MAX1472 is used in remote keyless entry, RF remote controls, tire pressure monitoring and radio controlled toys.
Single supply voltage range from 2.1V to 3.6V
Automotive temperature range from -40°C to 125°C
Low operating supply current is 5.3mA (50% duty cycle, fRF=315MHz, 2.7V supply, 10dBm output power)
Supports ASK with 90dB modulation depth
Transmit efficiency with CW is 43.6% at fRF = 315MHz and 41.3% at fRF = 433MHz
Transmit efficiency at 50% duty cycle is 37.6% at fRF = 315MHz and 35.1% at fRF = 433MHz
Uses small low cost crystal
Fast-on oscillator, 220µs start-up time
Standby current of 5nA at VENABLE < VIL, TA < +85°C
Phase noise of -84dBc/Hz at fOFFSET =100KHz, fRF = 315MHz
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts