Web Analytics
Part Datasheet Search > - > UC2906 Datasheet PDF
Images are for reference

UC2906 Datasheet PDF

Part Series:
UC2906 Series
Category:
-
Description:
Sealed Lead-Acid Battery Charger
Updated Time: 2023/09/27 09:01:40 (UTC + 8)

UC2906 Datasheet PDF -

17 Pages
TI
Battery Charger Lead Acid battery, 40V input, SOIC-16
17 Pages
TI
Battery Charger for Lead Acid battery, 40V input, DIP-16
17 Pages
TI
Linear Lead-Acid Battery Charger 16-SOIC -40 to 70
17 Pages
TI
Charge Controller Lead-Acid 20Pin PLCC Tube
17 Pages
TI
Sealed Lead-Acid Battery Charger

UC2906 - TI Specifications

TYPE
DESCRIPTION
Case/Package
PDIP-16
show more

UC2906 - TI Function Overview

The UC2906 series of battery charger controllers contains all of the necessary circuitry to optimally control the charge and hold cycle for sealed lead-acid batteries. These integrated circuits monitor and control both the output voltage and current of the charger through three separate charge states; a high current bulk-charge state, a controlled over-charge, and a precision float-charge, or standby, state.
Optimum charging conditions are maintained over an extended temperature range with an internal reference that tracks the nominal temperature characteristics of the lead-acid cell. A typical standby supply current requirement of only 1.6mA allows these ICs to predictably monitor ambient temperatures.
Separate voltage loop and current limit amplifiers regulate the output voltage and current levels in the charger by controlling the onboard driver. The driver will supply up to 25mA of base drive to an external pass device. Voltage and current sense comparators are used to sense the battery condition and respond with logic inputs to the charge state logic. A charge enable comparator with a trickle bias output can be used to implement a low current turn-on mode of the charger, preventing high current charging during abnormal conditions such as a shorted battery cell.
Other features include a supply under-voltage sense circuit with a logic output to indicate when input power is present. In addition the over-charge state of the charger can be externally monitored and terminated using the over-charge indicate output and over-charge terminate input.
Optimum Control for Maximum Battery Capacity and Life
Internal State Logic Provides Three Charge States
Precision Reference Tracks Battery Requirements Over Temperature
Controls Both Voltage and Current at Charger Output
System Interface Functions
Typical Standby Supply Current of only 1.6mA
show more
Part Datasheet PDF Search
Loading...
72,405,303 Parts Datasheet PDF, Update more than 5,000 PDF files ervery day.

Relate Parts